Best Places to Install Security Cameras at Home

Quick Answer

The best places to install security cameras around most Australian homes are the front entrance, driveway, side access, rear entrance and garage. These positions help capture people approaching, entering and leaving the property while monitoring the areas where vehicles, tools and other valuable items are commonly kept.

For many homes, four to six carefully positioned cameras will provide more useful coverage than a larger system installed without a clear plan. Every camera should have a specific purpose, such as identifying a visitor, monitoring a vehicle or covering a concealed access route.

If you are still deciding how large your system should be, read our complete guide explaining how many security cameras you need for different property sizes and layouts.

Why Security Camera Placement Matters

Many homeowners begin comparing security systems by looking at camera resolution, night vision range, storage capacity and app features.

These specifications are important, but they cannot compensate for poor placement.

A high-resolution camera mounted too high, pointed toward strong sunlight or aimed across an unnecessarily large area may provide less useful footage than a lower-resolution camera installed in the correct position.

The aim is not simply to see that someone was on the property. A properly planned camera should help show:

• Who approached the property
• Which direction they came from
• Where they moved
• Which entrance they used
• What they did while on the property
• Which direction they left

This is the difference between general observation and useful identification footage.

At Smarter Homes Australia, we assess the property layout, likely access routes, lighting, viewing distances and potential blind spots before recommending camera positions. Our approach is to design the system around the property rather than applying the same camera package to every home.

For a broader look at CCTV, video doorbells, smart locks, lighting and other security options, read The Ultimate Guide to Home Security in Australia.

Before Installing Security Cameras

Before selecting camera locations, walk around the property and consider how a visitor, delivery driver or unauthorised person could realistically approach the home.

Look beyond the most obvious front entrance and consider:

• Paths connecting the street and house
• Driveways and vehicle access
• Side gates and narrow walkways
• Rear doors and sliding doors
• External staircases
• Garage and shed entrances
• Areas concealed by fences or landscaping
• Doors or windows that cannot be seen from the street
• Locations where valuable equipment is stored

Most homes have a limited number of practical access routes. Those routes should usually be prioritised before attempting to record every section of lawn, fence or garden.

The Best Places to Install Security Cameras

1. Front Entrance

The front entrance is usually the highest-priority camera location because it is used by residents, visitors, delivery drivers, tradespeople and other people approaching the home.

A front entrance camera should ideally capture:

• People walking toward the door
• A useful view of the visitor’s face
• Deliveries and packages
• Activity around the entrance
• The direction from which the person approached
• Anyone interacting with the door, lock or nearby windows

A common placement mistake is installing the camera directly above the door and pointing it steeply downward. This may show that someone arrived, but it can produce an unhelpful view of the top of their head.

Where possible, position the camera slightly to the side of the entrance so it records people as they approach. The exact location will depend on the path, porch, eaves, lighting and distance from the door.

A video doorbell can provide useful close-range footage and two-way communication, but it does not always replace a wider CCTV camera. The doorbell may record the final interaction at the entrance, while the CCTV camera captures the person’s approach and direction of travel.

Homeowners considering both technologies can explore our professional CCTV installation services and discuss whether a combined setup is appropriate.

2. Driveway

The driveway is commonly the next area to prioritise, particularly when vehicles, trailers, bicycles or other equipment are stored outside.

A properly positioned driveway camera may help monitor:

• Vehicles entering and leaving
• People approaching from the street
• Activity around parked vehicles
• The garage entrance
• Movement between the driveway and front door

Avoid asking one camera to cover the driveway, front door, entire front yard, footpath and street at the same time. Although an extremely wide view may look impressive on a monitor, important people and vehicles can appear too small in the image.

The camera should be aimed so the main area of interest occupies a useful portion of the frame.

Can a Driveway Camera Read Number Plates?

A standard driveway camera may record vehicles entering and leaving without consistently capturing readable number plates.

Number plate detail depends on several factors, including:

• Distance between the camera and vehicle
• The angle of the vehicle
• Camera resolution and lens selection
• Vehicle speed
• Daytime and night-time lighting
• Headlight glare
• Exposure and shutter configuration

Where number plate identification is an important requirement, the camera position and system specifications should be planned for that purpose. A general overview camera should not automatically be treated as a dedicated number plate camera.

3. Side Access and Side Gates

Side access is one of the most commonly overlooked parts of a residential camera system.

Side paths are often narrow, partially concealed and less visible from the street. They may provide direct access to the backyard, rear entrance, pool area, garage or under-house storage.

A side access camera may be used to monitor:

• Side gates
• Narrow walkways
• External staircases
• Utility areas
• Air-conditioning units
• Access between the front and rear of the property

For a long, narrow path, positioning the camera lengthways down the access route will often provide a more useful view than pointing directly across it. This can record someone for longer and provide a clearer indication of their direction of travel.

Check whether gates, bins, plants or other objects will regularly block the view. Moving branches and vegetation can also create unnecessary motion alerts, particularly during windy conditions.

4. Rear Entrance

Rear doors and sliding doors should not be overlooked simply because they are not visible from the street.

Rear entrances may include:

• Sliding patio doors
• Laundry doors
• Deck entrances
• Doors connecting the garage and backyard
• External stairs leading to an upper level
• Entrances from parkland, pathways or adjoining areas

The camera should normally capture the route leading toward the entrance as well as the door itself.

For larger patios and outdoor entertaining areas, avoid positioning the camera so widely that people become small figures in the distance. Focus the view on the likely entrance, walkway or activity area you actually need to monitor.

5. Garage Entrance

Garages commonly contain much more than vehicles. They may also store:

• Power tools
• Bicycles
• Sporting equipment
• Camping and fishing gear
• Gardening equipment
• Household storage
• Access to the main home

An external camera can monitor the garage door, driveway and approach, while a separate internal garage camera may provide additional footage if someone enters.

If the garage has an internal door leading into the home, consider whether the camera layout adequately records movement toward that entry point.

Detached garages may need separate network and cabling considerations. Do not assume the home’s existing Wi-Fi signal will remain reliable at the final camera location.

6. Detached Sheds and Workshops

Detached sheds and workshops may contain valuable tools, machinery, bicycles or storage while being located away from the main house.

Depending on the property, useful positions may include:

• The shed entrance
• Roller doors
• The pathway leading to the shed
• Vehicle access
• Windows or secondary doors
• The area between the shed and property boundary

Wireless cameras can be useful where cabling is difficult, but the final location must have reliable connectivity. A phone showing some Wi-Fi reception near the shed does not necessarily mean a camera will maintain a stable connection at all times.

For larger properties, a wired connection, network extension or separately planned wireless link may provide a more reliable result.

You can compare the available options in our guide to wired versus wireless security cameras.

7. Backyard and Outdoor Entertaining Areas

A backyard camera may be appropriate when the area contains:

• A rear gate
• A patio or deck
• A pool gate
• A shed or workshop
• Outdoor equipment
• Children’s play areas
• Pet areas
• A path between different sections of the property

The correct position depends on why the area is being monitored.

A camera intended to monitor a rear gate may require a different angle from a camera used to check on pets or receive notifications when someone approaches the patio.

Where several different areas need to be monitored, one extremely wide camera may not provide enough detail. Multiple focused views can be more useful than a single overview image.

8. Internal Entry Routes

Not every home requires indoor security cameras. However, indoor cameras can be useful when positioned carefully and used for a clear purpose.

Potential locations include:

• Entrance foyers
• Hallways connecting external doors
• Internal garage entrances
• Staircases
• Shared living areas
• Areas containing valuable equipment

Indoor cameras should not be installed in bedrooms, bathrooms or other areas where residents and visitors reasonably expect privacy.

Household members should also understand where indoor cameras are located, what they record and why they are being used.

How High Should Security Cameras Be Mounted?

For many residential installations, a height of approximately 2.5 to 3 metres can provide a practical balance between useful image detail and protection against tampering.

This is a general guide rather than a universal rule. The correct height will depend on:

• The camera model and lens
• The distance to the area being monitored
• The required viewing angle
• The shape of the house and roofline
• Nearby lights
• Trees and landscaping
• Access for future maintenance
• The risk of accidental damage or tampering

Mounting a camera very high may provide a broad overview, but it can reduce the amount of facial detail captured. Mounting it too low may create a better facial angle but make the camera easier to reach.

The position should be chosen based on the actual footage required rather than simply installing every camera at the highest available point.

Plan for Movement, Not Just Open Space

One of the biggest differences between a carefully planned system and a basic installation is how the layout accounts for movement.

Instead of asking only what part of the property a camera can see, ask:

• Where would someone enter?
• Which direction would they walk?
• Where would they pause?
• Could they reach a door without crossing the camera’s view?
• Could another object block their face?
• Would the camera record them approaching and leaving?

A camera that records a person moving through an access route will usually provide more useful context than one aimed at a large area where little meaningful activity occurs.

Common Security Camera Placement Mistakes

Mounting Every Camera Under the Eaves

Installing every camera under the eaves can create a neat and consistent appearance, but it does not always create the best footage.

Depending on the home, cameras positioned high under the roofline may mostly record the tops of people’s heads. A mixture of carefully selected positions can provide better identification and overview coverage.

Trying to Cover Too Much With One Camera

One camera should not necessarily be expected to monitor the driveway, front yard, street, garage and front entrance equally well.

Give every camera a primary purpose. For example:

• Identify people approaching the front door
• Monitor vehicles in the driveway
• Cover movement through a side gate
• Record activity at a rear entrance

Once the main purpose is established, the camera angle and lens can be selected accordingly.

Pointing Cameras Toward Strong Sunlight

Direct sunlight can create glare, silhouettes and rapid exposure changes.

Brisbane’s strong afternoon sun is particularly important when positioning cameras on the western side of a property. In some cases, moving the camera to an adjacent wall or adjusting the angle can improve the image.

The sun also changes position throughout the day and across the year, so a camera that looks clear during installation may perform differently during the early morning or late afternoon.

Ignoring Night-Time Conditions

A camera position should be tested during the day and at night.

Night-time image quality may be affected by:

• Vehicle headlights
• Streetlights
• Floodlights
• Infrared reflections
• Nearby walls and eaves
• Insects close to the lens
• Rain and moisture
• Complete darkness beyond the camera’s effective range

A position that appears ideal during daylight may produce reflections, overexposure or limited detail after dark.

Installing Cameras Behind Glass

Placing an indoor camera behind a window may seem like an easy way to monitor outside, but it can cause problems at night.

Infrared light may reflect from the glass and obscure the image. Interior lighting, flyscreens, window tinting, dirt and reflections can also reduce footage quality.

Where outdoor monitoring is required, use a weather-resistant camera designed for external installation.

Positioning Cameras Near Moving Plants

Branches, leaves and hanging plants can block the camera or repeatedly trigger motion alerts.

Consider how landscaping will move in windy weather and how quickly vegetation may grow back into the camera’s field of view.

Relying on Weak Wi-Fi

Wireless cameras require a stable connection at the final mounting location.

Performance may be affected by:

• Distance from the router or home base
• Brick, concrete and metal structures
• Network congestion
• Nearby wireless interference
• Detached garages and sheds
• The number of connected devices

Smarter Homes Australia provides professionally installed wireless security camera systems for properties where a wireless solution is appropriate.

Forgetting About Future Maintenance

Cameras may eventually require cleaning, adjustment, servicing, firmware updates or battery charging.

A camera should not be installed where routine access will be unnecessarily difficult or unsafe.

Wired Versus Wireless Camera Placement

The type of system you choose will affect where cameras can be installed and how they operate.

Wired CCTV Cameras

Wired CCTV is commonly selected for homeowners who want:

• Continuous recording
• Centralised local storage
• Reliable power
• Multiple-camera coverage
• Reduced dependence on Wi-Fi
• A permanent, expandable system

The camera locations must allow for safe and practical cable routes. Roof access, wall construction and the location of the recorder can all affect the installation.

For current system information and indicative pricing, visit our CCTV camera installation page or read our detailed Brisbane CCTV installation cost guide.

Wireless Security Cameras

Wireless cameras may be appropriate for:

• Smaller properties
• Targeted monitoring
• Homes where running cables is difficult
• Rental or installation constraints
• Motion-based recording requirements

Wireless does not necessarily mean that no installation planning is required. The camera still needs reliable connectivity, a suitable mounting location and either battery maintenance or an appropriate power source, depending on the product.

The choice between wired and wireless cameras should be based on the property, recording requirements and long-term expectations rather than convenience alone.

Security Camera Placement for Brisbane Homes

Brisbane homes vary considerably in layout, construction and surrounding environment. A camera plan that works well for a modern suburban home may not suit a high-set Queenslander, corner block, townhouse or acreage property.

Local conditions can also affect camera performance, including:

• Strong afternoon sunlight
• Heavy rain and storms
• Dense gardens and moving vegetation
• Large roof eaves
• External staircases
• Detached garages and sheds
• Long driveways
• Pool gates and side access

For this reason, security camera placement should be based on the actual property rather than a standard package layout.

High-Set Queenslander Homes

High-set Queenslander homes can create additional security camera challenges because entrances, stairs and under-house areas may sit at different levels.

Important areas to consider include:

• The bottom and top of external staircases
• Front and rear access points
• Under-house storage
• Side pathways beneath the home
• Garage or carport access
• Elevated decks and verandas

Mounting every camera at the upper roofline may provide a broad overview but reduce facial detail at ground level. In some cases, combining an overview camera with a lower camera covering the main approach route will provide more useful footage.

Corner Block Homes

Corner blocks often have more exposed boundaries and possible approach routes than properties located between two neighbouring homes.

A corner property may require coverage of:

• The main front entrance
• The driveway
• The secondary street frontage
• Side fences and gates
• Rear access
• Areas concealed by landscaping

A standard four-camera package may still be suitable, but each camera needs to be positioned carefully to avoid leaving an exposed side of the property unmonitored.

Townhouses and Duplexes

Townhouses and duplexes generally have smaller external areas, but shared driveways, neighbouring windows and common boundaries require more careful positioning.

The system should remain focused on the homeowner’s own entrance, garage and private areas without unnecessarily recording neighbouring properties.

Useful locations may include:

• The private front entrance
• The garage door
• A small courtyard or rear entrance
• Side access that belongs exclusively to the property

Where common property is involved, homeowners should check any relevant body corporate or community title requirements before installing cameras.

Acreage and Large Properties

Acreage properties often require a different approach because important areas may be separated by substantial distances.

Potential camera locations may include:

• The main driveway entrance
• Automatic gates
• The house perimeter
• Sheds and workshops
• Machinery storage
• Stables or animal areas
• Secondary access roads
• Water tanks and other infrastructure

Wi-Fi coverage and cabling distances become more important on larger properties. A camera mounted hundreds of metres from the house may require a point-to-point wireless connection, network extension or separately planned power and communications solution.

For acreage homes, the system should usually be divided into security zones rather than attempting to monitor the entire property from the house.

Homes Backing Onto Parks or Bushland

Properties backing onto parkland, pathways, creeks or bushland may have less visible rear boundaries.

Rear gates, fences and backyard access points may need greater attention, particularly where someone could approach without being seen from the street.

Camera placement should focus on defined access routes rather than pointing across a large natural area where movement from animals, branches and changing light could generate excessive alerts.

Example Four-Camera Home Security Layout

A four-camera system can provide effective coverage for many apartments, townhouses and smaller family homes when the cameras are carefully positioned.

Camera 1: Front Entrance

Position the first camera to capture visitors and people approaching the front door.

Camera 2: Driveway or Garage

Use the second camera to monitor vehicles, the garage entrance and movement from the street toward the home.

Camera 3: Side Access

Position the third camera along the most concealed side path or near the main side gate.

Camera 4: Rear Entrance

Use the final camera to cover the rear door, patio, courtyard or backyard access point.

This layout may be appropriate where the home has one primary driveway, one important side access route and a clearly defined rear entrance.

It may not be sufficient for a corner block, high-set home, large shed, detached garage or property with multiple side gates.

 

Example Six-Camera Home Security Layout

A six-camera system can provide broader protection for medium and larger family homes.

A practical layout may include:

1. Front entrance
2. Driveway
3. Left-side access
4. Right-side access
5. Rear entrance
6. Garage, shed or outdoor entertaining area

The additional cameras should address genuine blind spots or separate areas of concern. They should not simply duplicate the same footage from a slightly different angle.

Before increasing the number of cameras, confirm that the existing cameras are positioned correctly and that each additional camera serves a clear purpose.

For more detailed property-size examples, read our guide explaining how many security cameras you need.

Should Security Cameras Be Visible?

Visible cameras can help communicate that a property is protected and may deter opportunistic behaviour.

However, a visible camera should still be:

• Mounted securely
• Protected from easy tampering
• Positioned for useful footage
• Installed neatly
• Accessible for future maintenance

Hiding every camera is not always necessary. In many homes, a combination of visible external cameras and carefully positioned internal or secondary cameras provides a practical balance.

Fake cameras should not be considered a substitute for a functioning security system. They do not provide footage, alerts or evidence if an incident occurs.

Security Camera Privacy Considerations

Security cameras should primarily monitor your own property and the areas you reasonably need to protect.

Avoid positioning cameras so they unnecessarily record:

• Neighbouring windows
• Private neighbouring yards
• Bedrooms
• Bathrooms
• Shared areas outside your control
• Areas where visitors reasonably expect privacy

Some incidental coverage of the street or neighbouring boundaries may be difficult to avoid when monitoring a driveway or front entrance. The camera should still be directed toward the security of your own property rather than intentionally monitoring other people.

Where supported by the system, privacy masking can be used to block selected parts of the image. Activity zones can also help reduce alerts from areas outside the property.

Additional requirements may apply when cameras are used in:

• Rental properties
• Workplaces
• Body corporate areas
• Shared residential properties
• Commercial premises
• Locations where audio is recorded

This article provides general information and should not be treated as legal advice. Obtain appropriate advice where an installation may affect tenants, employees, neighbours or shared property.

How to Test a Security Camera Position

Before permanently finalising a camera position, test the actual view where possible.

Do not judge the location only by looking at the wall or roofline. Review the footage from the camera itself.

Test During the Day

Check:

• Image clarity
• Facial detail at the intended distance
• Sunlight and glare
• Objects blocking the view
• Whether the target area occupies enough of the frame
• Whether neighbouring areas are being unnecessarily recorded

Test at Night

Review:

• Infrared performance
• Existing outdoor lighting
• Headlight glare
• Reflections from walls or eaves
• Dark areas beyond the camera’s effective range
• Image quality when a person approaches

Test Motion Alerts

Walk through the area from several directions and confirm that notifications are triggered at the right time.

Check whether:

• The person is detected before reaching the door
• Moving plants create repeated false alerts
• Traffic or pedestrians outside the property trigger notifications
• Activity zones need adjustment
• The notification arrives quickly enough to be useful

Review Recorded Footage

After testing, review the recording rather than relying only on the live view.

Ask:

• Can the person’s face be seen?
• Can their direction of travel be established?
• Is clothing detail visible?
• Can the relevant activity be clearly understood?
• Is the footage too wide or too distant?
• Does another camera unnecessarily duplicate the same view?

Testing footage before completing the installation can prevent expensive repositioning later.

How Much CCTV Storage Do You Need?

Camera placement is only one part of the system. Homeowners should also consider how footage will be stored and how long recordings need to be retained.

Storage requirements depend on:

• The number of cameras
• Camera resolution
• Frame rate
• Continuous or motion-based recording
• Compression settings
• The number of days of footage required

A system recording continuously from six high-resolution cameras will require more storage than a smaller system recording only selected motion events.

For wired CCTV systems, recordings are commonly stored locally on a network video recorder. Wireless systems may use a home base, memory card, local storage device or subscription-based cloud service, depending on the product.

Storage should be discussed during system design so the recorder and hard drive are matched to the homeowner’s expectations.

Should You Install Security Cameras Yourself?

Some wireless and battery-powered cameras are designed for straightforward homeowner installation.

A DIY system may suit smaller properties where:

• Only one or two cameras are required
• The mounting locations are easy to access
• Wi-Fi coverage is reliable
• Continuous recording is not essential
• No complex cabling is needed

Professional installation may be more appropriate where:

• Multiple cameras are required
• The home has difficult roof access
• Cables need to be concealed
• Night-time identification is important
• The property has multiple blind spots
• Detached structures need coverage
• The system must integrate with alarms, intercoms or smart-home equipment
• The homeowner wants continuous local recording

A professional installer can help determine the correct camera type, viewing angle, mounting height, cable path and storage capacity before work begins.

Professional Security Camera Installation in Brisbane

Smarter Homes Australia provides professional security camera installation throughout Brisbane and surrounding areas.

We assess each property individually and consider:

• Camera quantity
• Camera placement
• Viewing distances
• Day and night image quality
• Blind spots
• Cabling routes
• Wi-Fi coverage
• Recording and storage requirements
• Remote viewing
• Future system expansion

Our team can install and configure compatible wired or wireless systems, assist with access on supported devices and explain how to review footage, manage alerts and use the key features.

To learn more, visit our security camera and CCTV installation page.

Homeowners comparing pricing can also read our detailed CCTV installation cost guide for Brisbane.

For examples of completed work, explore our installation gallery.

Frequently Asked Questions

Where is the best place to install a security camera?

For most homes, the front entrance is the highest-priority location because it records visitors, deliveries and one of the main access points. The driveway, side access and rear entrance should generally be assessed next.

How many security cameras does a house need?

Many family homes can be effectively covered with four to six well-positioned cameras. Smaller apartments and townhouses may need fewer, while corner blocks, acreage properties and larger homes may need more.

Read our guide on how many security cameras you need for more detailed examples.

How high should outdoor security cameras be mounted?

For many residential properties, approximately 2.5 to 3 metres provides a practical balance between useful footage and tamper resistance. The ideal height depends on the camera, lens, viewing distance and layout of the property.

Should I install cameras on every corner of my house?

Not necessarily. Installing cameras on every corner can create duplicated coverage while still missing important entry routes. Each camera should be positioned to monitor a specific area or activity.

Should security cameras be visible?

Visible cameras can help show that a property is protected and may discourage opportunistic behaviour. They should still be securely mounted and positioned where they cannot be easily tampered with.

Can a security camera point toward the street?

Some street coverage may be unavoidable when monitoring a driveway or front entrance. The camera should remain focused primarily on protecting your property and avoid recording more public or neighbouring space than reasonably necessary.

Can I point a security camera at my neighbour’s property?

Cameras should be directed primarily toward your own property. Avoid unnecessarily recording neighbouring windows, private yards or other sensitive areas. Adjust the angle or use privacy masking where appropriate.

Can security cameras identify number plates?

A security camera may capture number plate detail when the distance, angle, lighting, lens and camera settings are appropriate. A general driveway camera should not automatically be expected to perform as a dedicated number plate camera.

Do security cameras work at night?

Yes. Many security cameras use infrared or low-light technology. However, night-time performance still depends on the camera position, lighting, reflections, viewing distance and surrounding environment.

Should I install cameras inside my home?

Indoor cameras can be useful for monitoring entrance foyers, hallways, internal garage doors, pets or selected shared areas. They should not be installed in bedrooms, bathrooms or other areas where people reasonably expect privacy.

Are wired cameras better than wireless cameras?

Wired systems are generally well suited to permanent installations, continuous recording and multi-camera coverage. Wireless cameras may be more suitable where cabling is difficult or only targeted monitoring is required.

Read our comparison of wired and wireless security cameras to understand the differences.

Can wireless cameras be installed on a shed?

Yes, provided the shed has reliable Wi-Fi coverage and an appropriate power or battery arrangement. Detached sheds may require a network extension or alternative connection where the main home’s Wi-Fi signal is weak.

Where should security cameras not be installed?

Avoid bedrooms, bathrooms and areas where people reasonably expect privacy. Cameras should also not be installed where glare, reflections, moving plants, weak Wi-Fi or an excessively high mounting position will reduce performance.

Should cameras record continuously or only when motion is detected?

Continuous recording provides a complete timeline but requires more storage. Motion-based recording can reduce storage requirements but depends on reliable detection and correct configuration. The best option depends on the system and how the footage will be used.

Is professional security camera installation worthwhile?

Professional installation can help improve camera placement, image quality, cable routing, night-time performance, storage planning and system reliability. It can also reduce the risk of purchasing unnecessary cameras or leaving important blind spots.

How much does CCTV installation cost in Brisbane?

The cost depends on the number and type of cameras, recorder capacity, cable access, property construction and installation complexity.

Read our Brisbane CCTV installation cost guide for more detailed pricing information.

Final Camera Placement Checklist

Before completing your security camera installation, confirm that:

• Every camera has a clear purpose
• The front entrance is adequately covered
• The driveway and garage are monitored
• Side and rear access points are not overlooked
• Cameras are mounted at a useful height
• Important activity occupies enough of the image
• Daytime glare has been considered
• Night-time footage has been tested
• Wireless cameras have reliable connectivity
• Moving plants will not create excessive alerts
• The cameras do not unnecessarily monitor neighbouring property
• Footage can be stored for the required period
• The cameras can be accessed safely for maintenance

Plan the System Before Installing the Cameras

The best security camera system is not necessarily the system with the most cameras.

It is the system where every camera has a clear purpose and provides useful footage.

Start with the routes people use to approach the property. Prioritise entrances, driveways, side access, rear doors and areas containing valuable assets. Test each camera during the day and at night, and make sure people and vehicles appear large enough in the image to provide meaningful detail.

Careful placement can improve coverage, reduce blind spots and limit unnecessary notifications without increasing the overall size of the system.

Why trust Smarter Homes Australia?

We’ve installed security cameras across homes and businesses throughout Brisbane and South East Queensland. Every property is different, so we design systems to minimise blind spots while ensuring footage is useful if an incident occurs.

Smarter Homes Australia provides professional advice and security camera installation across Brisbane and South East Queensland.

For help designing the right camera layout for your property, visit our CCTV installation page or contact Smarter Homes Australia for a quote.